Seating 200 or 300 guests at round tables of 10 is one of the most time-consuming parts of planning a Singapore wedding. It's a puzzle with family politics on top: who sits near the stage, which aunties shouldn't share a table, and where to put the friend who's coming alone. This guide walks through it in the order that saves the most rework.
1. Start when most RSVPs are in
Don't start the seating plan too early. Until most of your guests have replied, you'll keep moving people around. A good time to start is when about 80–90% of RSVPs are in, usually three to four weeks before the wedding.
Then work backwards from the banquet manager's deadline. Most hotels and restaurants want the final table count and seating plan about one week before the day, so that the kitchen, the table cards and the seating board can be prepared.
2. Know your layout
The standard in Singapore is a round table of 10. Some venues allow 11 or 12 at a squeeze, but check first: an extra chair makes the table tight and the venue may need to change the place settings. Before you assign anyone, ask the banquet manager for:
- The floor plan, with each table's position and number
- Where the stage, the march-in aisle and the entrance are
- The maximum number of tables for your room, and the minimum you've committed to
- Whether there's space for an extra table if you need one
Divide your confirmed headcount by 10 to get a rough table count, then round up. Remember that the main table usually seats fewer people.
3. Seat the main and VIP tables first
Start with the tables everyone will notice. The main table, with the couple and usually both sets of parents, goes nearest the stage. Then place:
- Grandparents and elderly relatives, close to the front and away from the speakers
- Close family of both sides, such as uncles, aunties and siblings with their partners
- Any VIP guests your parents have invited
Agree these tables with both families before you go further. They're the ones most likely to cause a discussion, and everything else fits around them.
4. Group everyone else
Sort the remaining guests into groups who already know each other: each side's extended family, colleagues, secondary school and university friends, church or CCA groups, neighbours and family friends. Then fill tables group by group.
- Keep a group together, even if that means splitting it into two neighbouring tables.
- Avoid seating one guest alone at a table of strangers. If someone only knows the couple, seat them with a friendly group of a similar age.
- Keep each family side mostly together, so parents can find their relatives easily during the yam seng and table visits.
5. Plus-ones, kids and odd numbers
Groups rarely come in neat tens. A table of 7 colleagues needs 3 more people, and that's where "fillers" help: friendly guests who don't mind joining another group, such as a cousin couple or friends who already know some of the table.
- Plus-ones: always seat them with their partner, and count them in the table total.
- Kids: count every child who needs a seat. Babies in prams or on a parent's lap may not need one, but tell the venue so they can leave space for a high chair.
- Reserve table: if your budget allows, keep one table mostly empty near the back for walk-ins and last-minute plus-ones.
6. Note dietary needs per guest
Record vegetarian, halal and allergy needs against each guest, not just as an overall total. The caterer needs to know which table each special meal goes to, otherwise the vegetarian guest at table 18 gets served last or not at all. If you're offering a choice of mains, record each guest's pick in the same way.
7. Table numbers or table names
Numbered tables are the simplest for guests and the venue. Some couples skip table 4 or 13. If you do, tell the banquet manager so their numbering matches yours. Others prefer names, such as flowers, cities you've travelled to or favourite songs. Names are a nice touch but harder to find in a large ballroom, so put the table name and a number on the table card.
8. Final checks before you send the plan
- Every table's headcount matches what the venue has set up, including the main table.
- The total number of guests matches the number you've given the caterer.
- Special meals are listed by table.
- No guest appears twice, and no confirmed guest is missing.
- You've printed a master list, A–Z by name with table numbers, for the reception table.
9. On the day: how guests find their table
Even a perfect plan fails if guests can't find their seat. There are three common ways to show it:
- Seating board: a large board at the entrance, sorted A–Z by name. Simple, but a crowd forms around it when guests arrive in waves.
- Escort cards: a card for each guest with their table number, laid out at the entrance. Elegant, but they take time to prepare and any late change means reprinting.
- Digital check-in: guests scan a QR code at the entrance and see their name and table on their phone, and the venue map if you upload one. Changes made the night before show up straight away, and your coordinator can see who has arrived.
Plan your tables in SeatMe
In SeatMe you can import your guest list from a CSV, give each guest a table number, and note dietary needs and meal choices. On the day, guests check in at the kiosk and see their table, and the coordinator follows arrivals and table counts on the live Dashboard. Read more about guest management or see how it works.
Frequently asked questions
Import your guest list, assign tables, and let guests see their table when they check in. Start free at seatme.sg.
Start free See what guests see